Aqua Lung Bali 3mm Women's Wetsuit
This product has been DISCONTINUED and replaced by:
The Aqua Lung Bali 3mm Women's Wetsuit packs a lot of features for a great price. The blue/black colour creates a bold statement, while super-stretch neoprene and stylish graphics ensure you are ready to hit the warmer climates.
- Super-stretch neoprene on shoulders, sleeves, and armpits.
- Magnetic collar that replaces the usual hook flap.
- Heavy duty #10 zipper.
- Flatlock stitch for comfort.
- Back zipper water shield.
- Pre-bent anatomic legs and arms.
- Embossed knee pad in Supratex.
- O-ring seals to finish the sleeves and limit water ingress.
Care before the dive
With any of the skin surfaces including Thermo-skin, care should be taken when donning the wetsuit to not snag the interior skin surfaces with a fingernail or toenail as this material can be cut. Avoid placing your wetsuit on or near any hot surfaces.
Care During the Dive
The exterior surface of your wetsuit is designed to withstand the normal wear and tear you might encounter during a normal dive. Abrasion against sharp rocks or other sharp objects can cut or puncture the exterior nylon surface so reasonable care should be taken to avoid these situations. Small cuts or tears can be easily repaired with wetsuit glue. Ask your dive professional for assistance.
Care After the Dive
When removing your wetsuit, first unzip all the zippers completely. Then remove one section at a time taking care to avoid puncturing any of skin surface panels with a fingernail.
- Saltwater and especially chlorine can "dry out" the neoprene material. When neoprene material "dries out" it loses its flexibility. To ensure the wetsuit material retains its flexibility for an extended period of time, it is important to thoroughly soak and rinse the wetsuit.
- Soak the wetsuit in a tub of warm freshwater (not over 120°F) for at least 15-20 minutes.
- After soaking, thoroughly hose off the wetsuit with fresh water
- Place the suit on a thick hanger with all the zippers open to ensure maximum air circulation and complete drying.
- Wetsuit material can develop a permanent crease if left folded for an extended period of time. It is best to store your wetsuit laying flat. If that is not possible, you can store your suit on a hanger. Use as thick a hanger as possible to better support the weight of the suit. The thicker the suit, the heavier, and therefore the thicker your hanger should be. There are several after-market hangers available designed specifically for this purpose.
- Store in a cool, dry and protected place out of direct sunlight.
- Do not store your wetsuit in the garage if the garage is used to park a vehicle. The exhaust emissions from the vehicle can over time deteriorate the neoprene.
Wetsuit Zipper Care and Maintenance
Zippers are designed to be pulled closed or open in a straight line. Try to avoid pulling on the zipper pulls at an excessive angle to their intended path of travel. It is best to ask your dive buddy for zipper assistance in either opening or closing the back-zipper of a one-piece back-zipped jumpsuit.
- Avoid any contact with oil, gasoline, aerosols, or chemical solvents.
- Do not expose any part to aerosol spray, as some aerosol propellants attack or degrade rubber and plastic materials.
- Do not use any type of alcohol, solvent or petroleum-based substances to clean or lubricate any part.
- Do not store your equipment near any oil, gasoline, chemicals, or solvents.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.